Teal jeans with embroidery and bling

I’ve been waiting to post about these jeans, hoping to get better pictures. Alas, between the rain and cold weather, I haven’t been able to get outside to take pictures so we’ll have to do with these indoor ones.

Teal jeans 1

Two years ago, I made a pair of jeans that was meant to serve as a wearable prototype. I had wanted to make a few more pairs but then life happened, and the planned jeans did not materialize. Until now. A few weeks ago, I finally picked up the pattern, Angela Wolf’s Angel Bootcut (AW 4200). I used the altered version from the prototype because it fit well enough, and added two refinements – one for fit, the other for style:

  • a 1/2″ flat seat adjustment, using Ann Rowley’s instructions, to eliminate at least some of the wrinkling on the back of the legs;
  • an adjustment to the width at the hem, tapering to the knee, to make the hem circumference 19″ so they can be worn with heels.

Teal jeans 2

The fabric is a stretchy denim from Emmaonesock. It’s 65% cotton, 32% polyester, and 3% spandex. It feels very cottony and comfortable, and doesn’t seat out. At least not noticeably.

Teal jeans - back closeup

I’ve been wanting to use this bubbly embroidery design set ever since I bought it last year. I thought the back pockets of these jeans were the perfect canvas for it. I combined three smaller designs in the software, and then played with them a bit so that each pocket is a little different. I had fun getting back into machine embroidery. Note for future: remember that 24 minutes of actual embroidery stitching time will easily mean several hours of work total.

The crystals took longer to put on than I had anticipated but it was easy work and fun to watch the designs come to life. This is the first time I’ve worn bling on my butt and I wasn’t entirely sure about it at first, but once I put them on, I loved them immediately.

Teal jeans - front closeup

I considered contrast stitching but it wasn’t right for this project. Instead, I topstitched tone-on-tone. The stitching is visible, but not in-your-face. The pockets, fly shield, and inside waistband are cut from a coordinating quilting cotton.

Teal jeans - zipper DIY

I didn’t have a coordinating zipper. I had white (too light) and navy (too dark). So I improvised with Sharpies, hehe. Blue and green make a decent teal together, don’t they? On one side, I only needed to color the 1/8″ or so that shows next to the teeth, on the reverse I colored the whole width of the tape because it can be seen when the fly is open. Not that it’s a common sight, ha! but I wanted to make it as close to perfection as I could.

I needed a refresher on sewing jeans so I used Angela Wolf’s jeans class on Craftsy. I’d watch a lesson, then sew that part. Then I’d watch another lesson and follow up with a sewing session. It was nice because the process is divided into manageable chunks, each of which is a visible progress towards the finish. Very satisfying.

I’ve been wearing these jeans quite a bit and love them. The fit is just right, the fabric comfortable, and now I want to clone them in other colors.

And that’s all I have about these jeans for now. If you have questions or compliments, please write them in the comments.

See you soon!

Back in the swing of things

For a person who values stability, I move an awful lot. At the end of September, we made our second major move this year and I’m just now starting to feel like things might return to some semblance of normalcy soon. Sewing has kept me sane (knitting too but lately I’ve been mostly sewing). Here’s how my new sewing studio looked after the movers left:

Sewing room before

And here’s how it looks now:

Sewing room after - view 1

It looked much like this just a few days after the movers left the hot mess you saw in the first picture because I cannot stand moving boxes. So I usually unpack everything in the first week. I had to wait another week or two to have my fabric closet delivered so at that point there were still seven large boxes of fabric in the room. But they sat along one wall and the rest of the studio was usable.

Sewing room after - view 2

I really like sewing in this room. It gets a lot of indirect light most of the day – the bay window faces north. The other two windows face east so they bring in lovely morning sunshine for a couple of hours every day. It feels comfortable to work in here although now that the temperature has dropped outside, I’m noticing a cold draft on my feet. I may need some thick socks or something. It is definitely the coolest room in the house, which is kinda nice because I can have the iron on all day without the room getting too warm.

The first thing I sewed after the move was an apron. I used to have several. Somehow they have all disappeared over the years and moves. And so a new apron was in order.


Pretty cool, eh? It was a panel I bought at the local quilting store. Easy-peasy. I lined it with a coordinating spiderweb print to make it reversible.

I have other sewing bits to share with you so those will follow in the next post or two.

See you soon!

Where did the time go?

It seems like just yesterday I was telling you about my beginnings with polymer clay and here we are two months later. Where did the time go? Did it go by fast for you too? We’ve been getting ready for the move next month, including a “recon” trip to the Washington, D.C. area so we’ll have some idea of what’s where when we get there. We visited Michael’s Fabrics which is always fun, found a couple of fabulous quilt stores and a yarn store within easy driving distance, and definitely decided to live on base instead of on the economy.

Then there was another trip, a totaled car (hail damage, no one injured, thankfully), and lots of sewing. A bit of the kind that produces wearable garments and a lot of the muslin kind. Real muslin. The kind that you wouldn’t want to be seen dead in it. Although my husband did mention it might be a good color for a pair of pants for me, so maybe I’ll keep that in mind.

Sure-Fit Designs 3-kit combo

Anyway, the many muslins were because I bought the Sure-Fit Designs 3-kit combo. It includes the dress kit, the pants kit, and the shirt kit. I’ll be reviewing them in detail as I work through them this fall. If you have this system and are starting to work with it, or if you’re considering buying it, my initial advice to you is this:

  1. Measure carefully. Like two or three times. At least. And check that you’re not measuring your “mirror posture” but how you really stand.
  2. Don’t try this when your weight is dropping fast because you decided to cut out refined sugar and processed foods right before you ordered the kit. (ahem!)

My summer 6-PAC turned out to be just 5 pieces – the red tops and white skirt you saw, and then I added a black skirt in Sophia knit and a light yellow rayon jersey top. All five pieces got quite a bit of wear and I’ve been really pleased with them. I’ve also made a bunch of PJs for both me and my husband. My most recent makes are a pair of black cotton pants and a long-sleeved top – in preparation for fall, I suppose. And fall sewing, or sewing plans, will be the subject of the next post because I really need to put some pictures together first. Not just for you, but so I have a good visual representation of what’s going on with my wardrobe. Or a checklist. Or something. Because I don’t think I can keep it all in my head and deal with this move at the same time.

See you soon!

My polymer journey – the beginning (part 2)

In the previous post, I showed you the first beads I ever made, my color reference beads and pivot tiles, and the many attempts at bracelets that finally led to something wearable. Today I’ll show you a bunch of other things that I worked on in between figuring out the bracelets.

Playing with color mixing

We’ll start back in Germany. In January I bought this beautiful yarn in my favorite yarn store, Strickliesel in Kaiserslautern. Those amazing colors totally inspired me to make beads for coordinating bracelets. It was a good exercise in using the color reference beads I’d made earlier.

Playing with Cabezels

Fast forward to March, now in Oklahoma. I ordered some CaBezels, made a basic lace cane, and proceeded to test them together. In the picture above they are not yet cured – they’re sitting on a tile, ready to go in the oven. They turned out quite nice except that the raw white-white cured to an off-white, which was a big disappointment.

Beads from Judy Belcher's tutorial

The next project was following Judy Belcher’s graduated lentil bead tutorial. In it, you’re supposed to make multiple canes using the same set of colors so they coordinate nicely. I don’t know if there’s a typo in the tutorial or if it’s just me not used to working with tiny pieces, but I got through making the first couple of canes and then I was out of clay. Hmm. Whatevs. I used what I had and made these beads. I was pretty proud of how they turned out even though they’re not exactly my style.

Polymer school

And then I found Polymer School. It’s a Czech program that basically promises to take you from new-to-polymer beginner to proficient jewelry maker. It took a few several emails and phone calls to work out the arrangements and then I was in. And the program is everything they promise and more. I love it. I’m still working my way through it. The picture above shows my first pieces, from the free intro video lesson. It was eye-opening for me to actually watch someone work the clay from package to finished, at real-time speed, and narrating every step of the way. The donut shape is the piece demonstrated in the video; I made the other shapes with leftover cane slices just for fun. This was my first project using Premo and I absolutely loved that the white stayed white after curing. It’s my new favorite.

Mokume gane

Here I was working with mokume gane – a fun technique that isn’t quite my style but worth learning anyway. I was mostly focused on the cuff bracelet and then used the leftovers to make the pendant and earring pieces and the beads. I’m still not entirely sure what I’m supposed to do with all the cane and veneers that I make, and I always make too much because I worry about not having enough. I think this is one of those things that take practice to figure out.

Happiness in a box

If you’ve ever wondered what happiness in a box looks like, wonder no more for you are looking at it. It’s a bunch of fabulous stamps, a silkscreen, a cabochon mold, samplers of metallic paints and glitter, and resin. (Obviously, you’re not seeing these things in the box but on my work tile, but they were in a box when the mailman handed it to me.) They will make for countless hours of joyful creating.

Happiness testing

This is what it looked like when I started playing with it. I was inspired by a project in one of my Fimo booklets – you can see the original in the upper left-hand corner.

Red white necklaces

Around this same time I sewed up a white skirt and two red tops, and I was looking to make some jewelry to wear with them. I didn’t have anything specific in mind; I was just playing and looking at what happens when I cut sheets of polymer and put them back together differently (kind of like quilting, but not exactly). And when I got something I liked, I cut a circle out of it. Or several circles whenever there was enough for more than one.

Yellow black pieces

A couple of days later, I woke up with a cool idea I was itching to try: red and white, circles, flat and domed, just play and see what happens. Well, what happened was that when I sat down to work, my muse had a different idea and I ended up combining yellow, white, and black to make the pieces above. Apparently, I needed to get that out of my system before I could go back to the originally-intended red and white.

Red white circle study

This stuff. Red and white circles. Different sizes, some flat, some domed, not sure where I’m going with it. I have a sense that was just the beginning.

Black white

Another project was testing Fimo Professional. I’m not sure if it’s just repackaged Fimo Classic or if they changed anything about the formula. I made color reference beads – gradients around the color wheel, and then just played with black and white. I thought the fuzzy effect was really neat. I found this brand rather crumbly but the colors are beautiful and the clay handles well.

Red white vacation jewelry

After a week of testing the Fimo and some interesting ideas that mostly didn’t pan out, I needed a break so it was back to Premo and simple things. I made two sets of jewelry just in time to wear on a mini-vacation over Memorial Day weekend. They are fun to wear. The top set is silkcreened and the bottom set is made with a technique called hidden magic.

Blue jewelry set

Next came this fun cane in black, white, and one color (Peacock Pearl in this case). Someone had posted a picture in one of my clay groups with a link to the YouTube video tutorial, I watched it and decided to give it a try. Making canes takes a lot of practice. Mine are still far from great but I thought this one turned quite pretty anyway. Also, notice I finally figured out how to put my name on pictures (yay!). I think I’ll be doing that from now on.

First brooch

This brooch is my take on one of the assignments in Polymer School. The color combination and dots idea came to me one night as I was going to sleep on our beach mini-vacation. I hope the green looks vivid on your screen – it really is in real life. It is such a happy brooch. It makes me smile every time I see it. Well, a picture of it these days because when my in-laws were visiting last week, my mother-in-law claimed it as soon as she set eyes on it. I was so tickled that she liked it that much.

Brooch and bracelets

She walked away with two brooches because I made her this one to go with her new wardrobe additions. She picked the colors and sat and chatted with me while I worked. It was fun to have company and also to be able to show her the possibilities and have her make choices on the spot. The coordinating bracelets are strung on an elastic cord to make them easy to put on and take off.

And that brings us to a close today. I have some fabrics washed and ready to cut and a knitting WIP that I’ll be sharing next time.

See you soon!

My polymer journey – the beginning

I’ve been meaning to write this post for quite a while to share my new creative journey with you but it’s been hard to find the right words or perhaps the courage. Back in 2004 when I started this blog, it was mostly about sewing. The occasional knitting project also made an appearance but mostly it was about sharing my sewing journey. By then I’d been sewing for quite a few years so while I shared some mishaps and “learning lessons” (ahem!), I wasn’t posting pictures of crooked seams and such. But polymer clay is new to me. Or rather, I am new to polymer clay. I started working with it last summer, at the end of July. So my work still shows “beginner clumsy” and may not be entirely suitable for public viewing. Consider yourselves warned, hehe.

First beads

This is the first photographic evidence of my polymer clay work. It’s a bunch of graduated beads in Fimo, which is all that was available locally (and a very meager selection, too). It’s date-stamped August 20, 2015. I still have those beads in my memory box.

Color beads 1

I then switched to Kato polyclay and made a new set of yellow beads, enough for a necklace, two bracelets, and a set of earrings. At the same time that I was making them, I was also working on color beads to get a sense of what colors I could mix from the basic primaries. The colorful tiled rectangles are pivot tiles – they show how the basic colors shift with the addition of neighboring colors on the color wheel, white, gray, and black.

Color beads 2

The next part of the color bead project was to go around the color wheel and make gradients between neighboring colors. This is an excellent reference for mixing colors to match or coordinate with fabrics, for example.

Yellow collection 1

You’ve seen the above picture before. It shows the yellow jewelry set with a shawl I knitted and a silk scarf from my beloved scarf collection. I wore my beads a lot. There’s something about the tactile experience of polymer clay that works for me both in its raw state and even more so when it’s cured. I wanted more polymer jewelry and my next endeavor was a bangle bracelet.

Not just one, as you will see, nor was it a straightforward project. In the polymer clay community, when anyone asks about making bangle bracelets, the first suggestion is to use a Coke can as the form. I have skinny wrists. I can put on a bracelet formed on a Coke can and then spend the rest of the day with my fingers splayed O.J. Simpson style to keep it from falling off. Not cool. Also not practical at all. I tried using a Red Bull can but that was too small to go over my knuckles.

Bracelets 1

I’m not easily deterred, hehe, so I then figured out how to make a bracelet in sections that could be strung on elastic. That took a few tries because I was working out not just the process of making it (and keeping the stringing holes open throughout) but also how wide it should be and how to cover the scrap clay base with a pretty veneer. All the shades of mud you see here are scrap clay, not really meant to be seen under normal circumstances. It usually forms the guts of a piece but is covered all the way around with something pretty-colored. The purple bracelet is fairly heavy and large and totally clunky. The bright green one came next. It’s not perfect but it is wearable. It was also the first piece that I sanded – that was a revelation. Using this green bracelet, I formed an oval-shaped cylinder to serve as a temporary armature for baking future bracelets.

Bracelets 2

Then I saw some pictures of cuff bracelets. A cuff bracelet is sort of like a bangle bracelet with a cut out section. It doesn’t go all the way around. Ideally, it is oval-shaped to fit the wrist just so. The opening helps in putting it on and taking it off but should be small enough that the bracelet doesn’t just come off on its own. I had the perfect baking form for it so I decided to give it a try. I made a few prototypes, again testing different widths and thicknesses, sizes of the opening, and various processes to ensure the visible parts would be as close to flawless as possible.

Bracelets 3

I finally came up with a way to make a cuff bracelet that requires only one curing and the outer layer wraps around the top and bottom edges so the inside structure is never seen while the bracelet is being worn. I even made my own template for it to ensure consistent results. It was great progress and I like wearing the cuffs I made this way.

Bracelets 4

And then one day I finally figured out how to make bangle bracelets in the right size for me. It involved some scraped skin when my first attempt was just a smidge too small and I wasn’t taking no for an answer. Peeps, if you’re trying to put on a bracelet and it just won’t go over your knuckles, don’t force it. Learn from my pain, hehe. Anyway, I now have a whole process for this, from extruding the rounded “snake” and shaping the base on my new temporary armature to the third and final curing, and then sanding the whole piece smooth.

All this time I was working on the bracelets, I was also spending a lot of time playing with other things. Pendants and earrings, for example. Figuring out my favorite shapes (circles, thankyouverymuch) and sizes, how to attach jewelry findings, how to finish the backs of the pieces, etc. I was also trying different techniques to find out which ones I like and want to take further. This post is getting awfully long so I’ll wrap it up now and share the rest next time.

See you soon!

Me-Made-May, week 4 and wrap-up

Just a wee bit late but here we go. Week 4:

May 22

Monday: red denim skirt and sparkly silver rayon top, plus me-made red bracelets.

May 23

Tuesday: white denim skirt, red rayon top, and me-made bracelets, earrings, and necklace.

On Wednesday, I drove out early in the morning to see my husband who had been gone the previous four weeks. I have an ugly hotel mirror shot which I won’t post but I was wearing the black denim skirt and the black/gray/red rayon print top. The next day, I had planned to go back to taking pictures but after the second day of driving, all I wanted was to be with my husband. Pictures were just not a priority. We spent a glorious long weekend at the beach and then he had to go back to his school and I had to drive two days to get home. And then it was June.

Lessons learned:

  • I like the clothes I made and enjoy wearing them. They make me feel like me. This is a great thing.
  • I have a nice core wardrobe of summer casual clothes. It’s been close to a decade since I had that.
  • I like wearing jewelry I made. It doesn’t matter if no one knows I made it. I know and it’s a fabulous feeling.
  • I need a routine. I’ve always known I liked a routine but it finally dawned on me last week that I really need it to function best. It’s almost amazing just how much goes right out the window when I’m in transition, whether it’s moving from one country to another or simply traveling. Maslow’s hierarchy of needs, I suppose.
  • Daily pictures are good but they are not necessary. I wore my SWAP wardrobe for the whole month of May and have continued to wear it now in June. Nice comfortable clothes will get worn, pictures or no pictures.

Participating in Me-Made-May was fun. Thank you, Zoe, for organizing it. I am hoping to figure out a similar cool-weather wardrobe soon so that I am ready when fall comes.

See you soon!

Me-Made-May, week 3 roundup

Yay. three weeks down. It’s hard to take pictures every day. I mean, I have a tripod and a fabulous camera with a remote, and a decent photo spot on the patio so it’s not that. But sometimes it’s hard to fit it in. Anyway, on to what I’ve been wearing.

May 15

Sunday was a chilly rainy day. I wore my trusty black denim skirt with a mystery jersey top (M6355). I have the long sleeves rolled up to show off my me-made bracelets but if I had to spend more time outside in that weather, those sleeves would have come right back down. Me-made earrings as well (polymer clay, naturally).

May 16

On Monday, off-black denim skirt with the darker red rayon jersey top (Burda 6695), and me-made bracelets on both arms. Some days I experiment to see which bracelets wear or feel better during regular activities, and some days I just want to wear my bracelets. All of them, if I could.

May 17

On Tuesday, another cold day, I needed long sleeves again. Black denim skirt, dark red Sophia knit top (M6355), me-made bracelet and earrings. Not that you can see the earrings much in this picture, but I like them and they are comfortable to wear.

May 18

Seriously, what’s with the cold days? It’s May! This was on Wednesday, and I wore the black denim skirt with my mystery jersey top, me-made earrings and bracelets. This black skirt gets a lot of wear. I love it. It is super comfy and goes with just about everything.

No picture for Thursday. I was playing with polymer clay all day. Not sure what I wore other than no makeup and no accessories. I woke up with an idea for some earrings and pendants that I had to try right away. I’m not even sure I had breakfast that day.

May 20

Friday was back to the black denim skirt and light red rayon jersey top (Burda 6695), with me-made bracelets, necklace, and earrings.

May 21

And finally, on Saturday, I wore the black denim skirt with the red/black printed ITY poly top (Burda 6695), and me-made bracelets.

It’s been a good, productive week. A little bit cold, and I could do without the severe weather warnings, but otherwise no complaints. I’ve spent many happy hours in the clay studio – that’s a fancy name for the breakfast nook where my work desk resides. I keep wanting to share my clay stuff with you all but every time I start thinking about clay, I immediately want to work with it so writing takes a back seat, again and again. But this week I’ll have several days without access to clay which should make for good writing-about-clay time.

See you soon!

Me-Made-May, week 2 roundup

Second week in and I’ve already started repeating outfits. More on this later.

May 8

On Sunday, I wore the multicolored top that started my obsession with Burda 6695. I paired it with the off-black denim skirt. I have a hard time telling the difference between it and the black denim in pictures but in real life, the colors are quite different.

May 9

On Monday I wore my new red top with the black denim skirt. The top is the first piece in my Summer 6-PAC.  I accessorized with me-made bracelets and necklace (polymer clay, of course).

May 10

I had been busy sewing on Monday so that I had a new outfit to wear on Tuesday. This is the heathered red top and white denim skirt, both part of my Summer 6-PAC. Me-made bracelets again. I just love them.

May 11

Back to old (ha!) clothes on Wednesday – red denim skirt and black/white newsprint rayon jersey top. Same bracelets, three days in a row. I’d never know this if it weren’t for the pictures.

May 12

On Thursday, there was still red but less prominent. Off-black denim skirt and a mostly gray/black print top, and those bracelets. Seriously, I do have other bracelets.

May 13

Winding down the color for the weekend, hehe. On Friday I opted for the black denim skirt and silver metallic (sparkly!) top. As it turns out, I had paired the same pieces together just six days earlier. Maybe that says something about me.

And no picture for Saturday because I spent the day playing with polymer clay and I was totally in the zone. When I finally looked up, it was dark. But I did take note of what I wore: black denim skirt, red/black ITY poly top, black wool jersey cardigan, and the red me-made bracelets. It was a cool day and sometime in the afternoon I swapped the skirt for a pair of RTW black pants to keep me warm.

I’m happy to have clothes that I enjoy wearing. And even happier that they are made by me. I am starting to feel like it’s a lot of clothes though. I can’t quite explain it. I mean, it’s a SWAP plus two older and three brand-new pieces, so 16 pieces total. I enjoy having a variety of colors in tops. I’m not so sure about the skirts. I always reach for the black one first. It takes a conscious effort to pick the red or off-black one. So maybe I need three black skirts instead of black, off-black, and red. But I’m already wearing a uniform of sorts so do I want to eliminate the color element from the bottom half? I’ll have to think about it.

It would make getting dressed easier. Also, I was thinking that for winter, I could have a few black dresses and wear them with bright-colored cardigans or Viajante. Something to chew on.

In other news: I’ve been playing and claying and I will show you some polymer clay pieces next.

See you soon!

Summer 6-PAC wardrobe

The summer 6-PAC sew-along has started. People are coming up with all kinds of cool “stories” to make their wardrobe plans. I don’t have a cool story. But I do have the first three pieces finished.

Dark red top with skirtMay 10

I used my trusty patterns again – Burda 6695 for the tops and for the skirt, my favorite frankenpattern. All three fabrics are from Emmaonesock. The 11-oz. rayon/lycra jersey sews like a dream and feels great on the skin. I hope it wears and washes well, too, because I want these tops to last. The denim is the same stretch blend as the red and off-black skirts I made a few weeks ago.

Red white combo

Here are the three pieces all together. You can see that the reds are different. The darker one is called cadmium red, and the lighter one is called dark coral heather. Interestingly, mixing them up in polymer clay (Premo) calls for the same base: 7 parts cadmium red and 1 part fuchsia. For the darker color, the base is used as is. The lighter one is a 1:1 blend of the base with white. Colormixr tells me so.

Polymer clay to match

This morning I ordered some red sandals from Zappos. I hope they fit. And then I started working on coordinating jewelry for this red/white combination. The sheet above is made with a new-to-me technique called Sutton Slice. It’s fun to do. Now I need to figure out how to put it on a bracelet without demolishing the texture. The round pieces are still a WIP. The small ones are for earrings and the larger ones for pendants. I think. We’ll see how they turn out after the next baking.

And that’s all I have for now.

See you soon!

Me-Made-May, week 1 roundup

First seven days down and I’ve been wearing me-mades every day. And here’s photographic evidence:

May 1

The week started off cool, with temps in the 60’s. On Sunday I wore the black denim skirt from my recent SWAP, a red long-sleeved top (M6355) in Sophia double knit, an altered RTW scarf , and a me-made bracelet and earrings set.

May 2

Still cool on Monday so I swapped the colors. Red denim skirt from the SWAP, gray mystery knit top with long sleeves (M6355), same altered RTW scarf as the day before (this scarf has been getting a lot of wear in the last six months or so), and the same bracelet and earring set again.

May 3

On Tuesday it was warmer, but still cool enough that a cardigan was welcome. I wore the black denim skirt with the multicolor rayon jersey top (Burda 6695) and black wool jersey cardigan. All three pieces from the SWAP.

May 4

On Wednesday it was plenty warm and I wore the off-black denim skirt from the SWAP with an old RTW asymmetrical top. It was this top that inspired me to look for a pattern with cut-on cap sleeves when I was sewing the spring 6-PAC.

May 5

On Thursday, back to red. Red denim skirt and red/black ITY poly jersey top (Burda 6695) from the SWAP.

May 6

On Friday I was testing a new me-made bracelet and it doesn’t go with the reds. So I wore the black denim skirt and the silver metallic rayon jersey top (Burda 6695) from the SWAP. The bracelet turned out to be a step in the right direction in terms of sizing so there will be more bracelets soon.

May 7

For Saturday’s running around, the red denim skirt paired nicely with the dark gray rayon jersey top (Burda 6695) and a me-made bracelet with earrings.

Most of these clothes were from my recent SWAP, mostly because that’s pretty much all that’s wearable in my closet right now. I’m working on sewing up more pieces. I made a rich red rayon jersey top today and I’ll be wearing it soon. I also have a piece of white denim for a skirt that I plan to make tomorrow so there should be a bit more variety coming up.

In other news, I’ve been feeling an overwhelming urge to knit another Viajante. But I had a slight mishap with the business end of a clay blade a couple of days ago so one of my main knitting fingers is currently, er… on light duty, shall we say.

See you soon!